Ricoh B245-62 Service Training page 133

2.2 Energy Saver Mode: Low Power Mode
The machine enters low power mode when the
energy saver timer runs out after the last job.
When the machine enters low power mode, the
fusing temperature is lowered to 60°C.
The machine recovers to the ready condition if
one of the following occurs:
The recovery time is less than 10 seconds.
Slide 133
No additional notes
2. Energy Saving
The Energy Saver key is pressed
The platen cover is lifted
The user touches the operation panel
The front door is opened or closed
133
B245-62 / PD-C4