Ricoh B245-62 Service Training page 130

Power
Consumption
Plug In
Energy Saver Modes
Auto Off Mode
Sleep Mode
Slide 130
When the machine is not being used, the machine enters energy saver mode to
reduce the power consumption by turning off the LCD of the operation panel and
lowering the fusing temperature.
The area shaded green in this diagram represents the amount of energy that is
saved when the timers are at the default settings. If the timers are changed, then
the energy saved will be different. For example, if the timers are all set to 240
minutes, the green area will disappear, and no energy is saved before 240
minutes expires.
2. Energy Saving
2.1 Overview – 1
Warm-up Operation Mode
Ready Mode
Energy
Saving
Off/Sleep Mode
Auto Off Timer
Timer Starts
After 240 min
1 – 240 min
from last job
Description
If no printer/scanner or fax unit is installed:
No power is supplied to the printing engine and the controller.
When a printer/scanner or fax unit is installed:
No power is supplied to the printing engine, and almost none to the controller.
130
B245-62 / PD-C4
Time