Ricoh B245-62 Service Training page 135

2.2 Energy Saver Mode: Sleep Mode – 1
Sleep mode is used instead of auto off mode
when a printer/scanner unit is installed.
The machine enters sleep mode when one of the
following is done.
When the machine enters sleep mode, no power
is supplied to the printing engine, and almost
none to the controller.
The recovery time is less than 10 seconds.
Slide 135
No additional notes
2. Energy Saving
The auto off timer runs out after the last job.
The operation switch is pressed to turn the power
off.
135
B245-62 / PD-C4