Ricoh B245-62 Service Training page 137

2.2 Energy Saver Mode: Sleep Mode – 3
The machine recovers to the ready condition:
If the operation switch is pressed
» The operation panel lights. When warm-up is finished, the machine
goes to the ready condition.
» Then, after the job is completed, the machine returns to sleep mode
when the auto off timer runs out or the operation switch is pressed.
» This is the same as Off mode.
Power
Consumption
Warm-up Operation Mode
Ready Mode
Plug In
Slide 137
This timing chart shows what happens if the operation switch is pressed while
the machine in off mode.
2. Energy Saving
Warm-up Operation Mode
Ready Mode
Sleep Mode
Operation Switch is
pressed
137
Sleep Mode
Time
B245-62 / PD-C4