Cleaning Fluid Compatibility - Graco 25T804 Operation, Parts

Operation
16. If flushing with water, flush again with
mineral spirits or Pump Armor
a protective coating to prevent freezing
or corrosion.
17. Wipe sprayer, hose and gun with a rag
soaked in water or mineral spirits.
26
Cleaning Fluid
™
to leave
Compatibility
•
•
•
•
•
When spraying water-based materials,
flush the system thoroughly with water.
When spraying oil-based or flammable
materials, flush the system thoroughly
with mineral spirits or compatible
flushing solvent. When flushing with
solvents, always follow Grounding
Instructions, page 10.
To spray water-based materials after
spraying oil-based or flammable
materials, flush the system thoroughly
with water first. The water flowing out of
drain tube should be clear and sol-
vent-free before you begin spraying the
water-based material.
To spray oil-based or flammable
materials after spraying water-based
materials, flush the system thoroughly
with mineral spirits or a compatible
flushing solvent first. The solvent flow-
ing out of the drain tube should not con-
tain any water. When flushing with
solvents always follow Grounding
Instructions, page 10.
To avoid fluid splashing back on your
skin or into your eyes, always aim gun at
inside wall of pail.
3A8179C