Pressure Relief Procedure - Graco 25T804 Operation, Parts

Pressure Relief Procedure

Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashed fluid
and moving parts, follow the Pressure
Relief Procedure whenever sprayer is
stopped and before sprayer is cleaned or
checked, and before equipment is
serviced.
1. Engage the trigger lock.
12
Turn the ON/OFF switch to the OFF
2.
position. Power button is illuminated
when ON. Wait 7 seconds for power to
dissipate.
3. Turn pressure control to lowest setting.
Disengage the trigger lock.
4. Hold a metal part of the gun firmly to a
grounded metal pail. Trigger the gun to
relieve pressure.
5. Engage the trigger lock.
ti25230a
ti25497a
3A8179C