Graco 25T804 Operation, Parts page 25

11. Turn prime/spray valve horizontal.
Trigger gun into grounded flushing or
waste pail for 20 seconds to purge fluid
from hose.
12. Engage trigger lock.
3A8179C
13. Turn pressure control knob to the lowest
pressure setting and turn ON/OFF
switch to OFF position. Power button is
illuminated when power is ON. Remove
battery.
14. Perform Pressure Relief Procedure,
page 12.
15. Remove filters from gun and sprayer if
installed. Clean and inspect. Install
filters. See separate gun manual.
ti24718a
Operation
25