Mercedes-Benz SLS AMG Owner's Manual page 214

respective wheel. Other wheel bolts could
work loose or damage the brake system.
Do not tighten the wheel bolts completely
while the vehicle is still jacked up. The vehicle
could topple off the jack.
Wheel bolt
:
Clean the wheel and wheel hub contact
X
surfaces.
Slide the emergency spare wheel onto the
X
centring pin and push it on.
Tighten the wheel bolts until they are fin-
X
ger-tight.
Unscrew the centring pin.
X
Inflate the collapsible emergency spare
X
wheel ( page 211).
Y
Tighten the last wheel bolt until it is finger-
X
tight.
Inflating the collapsible emergency
spare wheel
G WARNING
Inflate the collapsible emergency spare wheel
before lowering the vehicle. You could other-
wise damage the wheel rim.
Comply with the manufacturer's safety
instructions on the tyre inflation compressor
label and on the tyre sealant bottle.
Sticker "max. 80 km/h"
:
On/off switch
;
Operating instructions
=
Connector
?
Flanged cap
A
Pressure gauge
B
Pressure release screw
C
Filler hose
D
Pull the cable and filler hose D out of the
X
housing.
Unscrew the valve cap from the tyre valve.
X
Make sure that pressure release screw C
X
is closed.
Flat tyre
211
Z