Size And Brilliance Of Markers - Furuno GP-80 Operator's Manual

Unit of depth
1) Press [MENU ESC] [9] and [2].
2) Press or to select Unit of Depth.
3) Press t or s to select unit; meter, feet, or
fathom.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
Unit of water temperature
1) Press [MENU ESC] [9] and [2].
2) Press or to select Unit of Temp.
3) Press t or s to select unit; Centigrade or
Fahrenheit.
4) Press [NU/CU ENT] and [MENU ESC].
Unit of altitude
Available only in 3D mode.
1) Press [MENU ESC] [9] and [2].
2) Press or to select Unit of Altitude.
3) Press t or s to select unit.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
8 – 4
8.3 Size and Brilliance of
Markers
The DISPLAY SETUP menu lets you select
the size and brilliance of various markers.
Grid tone
The grid can be displayed in light or dark tone,
or turned off.
1) Press [MENU ESC] and [1]. The DIS-
PLAY SETUP menu appears.
DISPLAY SETUP
Grid
Dark
Course Bar
Dark
Time mark
Time Mark Dark Dark
Waypoint Size
Large
Cursor Size
Large
: Select
ENT : Enter
Figure 8-4 DISPLAY SETUP menu
2) Press or to select Grid.
3) Press t or s to select brilliance.
4) Press [NU/CU ENT] and [MENU ESC].
Course bar tone
The course bar can be displayed in light or
dark tone, or turned off.
1) Press [MENU ESC] and [1].
2) Press or to select Course Bar.
3) Press t or s to select brilliance.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
Time mark tone
The time mark can be displayed in light or
dark tone, or turned off.
1) Press [MENU ESC] and [1].
2) Press or to select Time Mark.
3) Press t or s to select brilliance.
Light Off
Light Off
Light Off
Small
Small
MENU : Escape