Cancelling Destination - Furuno GP-80 Operator's Manual

Skipping route waypoints
You may skip route waypoints by displaying
"DI" (DIsable) next to the route waypoint in
the route list. Using Figure 5-14 as an ex-
ample, your ship is currently heading toward
waypoint 04 but is to switch course and head
to waypoint 03. In this case you would want
to skip waypoint 04.
Waypoint 01
Port A
New course
Waypoint 06
Port B
Figure 5-14
1) Press [WPT RTE] and [5] to display the
route list. Press the cursor keys to select
route.
"EN" indicates waypoint
is enabled. Display "DI"
to skip waypoint.
ROUTE :01
skip Distance
Trial Speed Auto Man (012.0kt)
001
01 0
01 0 04 EN
02 0 03 EN 345.67nm
34° 12.345' N
004
MARINE POINT APR 10' 95 12:35U
003 36° 12.345' N
A POINT
: RTE WPT
ENT:Enter
Figure 5-15 Route list
Waypoint 02
Waypoint 03
Waypoint 04
Waypoint 05
(In Use, REVERSE)
TTG
nm
D M H
2D 12H 34M
130° 23.456' E
135° 23.456' E
APR 10' 95 13:45U
CLEAR: Delete
MENU:Escape
2) Press or to select route waypoint to
skip.
3) Press t or s to shift the cursor to the
right of the waypoint number.
4) Press [ ] to change "EN"(ENable) to
"DI"(DIsable).
5) Press the [NU/CU ENT] key.
To reselect the waypoint, select it on the route
list and press [ ] to change "DI" to "EN".
Route waypoints are mutually skipped when
the navigators are sharing data.

5.2 Cancelling Destination

Destination is cancelled at both GPS naviga-
tors when they are sharing data.
1) Press the [GOTO] key.
2) Press [5] to select Cancel. The message
shown in Figure 5-16 appears.
Release GOTO ?
ENT:Yes MENU:No
Figure 5-16
3) Press the [NU/CU ENT] key.
5 – 5