Furuno GP-80 Operator's Manual page 100

TLL: Target latitude and longitude
$--TLL, 00, 3445.678,
121530, T
h
R*A5<CR><LF>
a: Target number... not used
b, c: Latitude
d, e: Longitude
f: Target name... not used
g: UTC... not used
h: Target status... not used
i: Reference target... not used
j: Checksum
FURUNO proprietary sentences
AGFPA: Autopilot information from FURUNO autopilot
Port
DATA1, DATA2
DATA3
DATA4
General data
1) Input of lighthouse/buoy information: Floppy disk stored
lighthouse/buoy information is supplied from PC connected to DATA4
port.
2) Input of waypoint data: Connect YEOMAN to DATA4 port
3) Input and output of waypoint/route data
C-8
N, 13521.234, E, abcd,
a b c
Input
NMEA 0183
Ver. 1.5/2.0
AGFPA, DBT, DPT,
MTW, TTL
External MOB
DGPS or general
data (selected
through menu)
d d f
Output
IEC 61162-1/nMEA 0183 Ver.
1.5/2.0
AAM, APA, APB, BOD, BWC,
BWR, BWW, GGA, GLL, GNS,
RMB, RMC, VTG, WCV< WNC,
WNR, WPL, XTE, ZDA, ZTG,
Rnn, RTE, DTM
LOG PULSE
Same as for DATA1.
General data
IEC 61162-1/nMEA 0183 Ver.
1.5/2.0
AAM, APA, APB, BOD, BWC,
BWR, BWW, GGA, GLL, GNS,
RMB, RMC, VTG, WCV< WNC,
WNR, WPL, XTE, ZDA, ZTG,
Rnn, RTE, DTM
g