Terminal Service Setting - Fujitsu Stylistic CE CT2000 Series User Manual

Fujitsu stylistic ce ct2000: user guide

Hide thumbs Also See for Stylistic CE CT2000 Series:

Table of Contents

TERMINAL SERVICE SETTING

• Prior to using the Remote Desktop

Protocol, you must first configure the

Terminal Service Settings which can be

accessed by double-clicking on the

Terminal Service Setting icon in the

Control Panel.

• If the server is not configured, the

system will suspend.

Double tapping the "Terminal service setting" icon in the

system control panel opens the Terminal Service Setting

Properties window.

When the window opens, verify that the settings are

correct, or enter the correct information.

"Logon settings", "Remote computer

sound", "Local devices", "Reconnect if

connection is dropped" are supported only

by Windows 2003 server.

Using only the Backup Server, "Enable settings for the

backup server" check box is displayed. If there is no check

mark in this box, all controls for this server are greyed

out.

U s i n g Y o u r T a b l e t S o f t w a r e

Table of Contents