Fujitsu Stylistic CE CT2000 Series User Manual page 13

S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ' s G u i d e – S e c t i o n O n e
Figure 1-4. Stylistic CT2000 Series CE Tablet Features (Top Side View)
Top Side Features:
The ports and connectors on the sides of the
tablet are protected by covers. Some of the
covers are secured with small Philips screws;
the others are protected by rubber flaps. If
you remove a cover that is secured with a
screw, retain the cover and hardware in a
safe place for later reinstallation.
Figure 1-5. Stylistic CT2000 Series CE Tablet (Bottom Side View)
Bottom Side Features:
• Tablet Cradle Interface: Twenty-two pin connector
for docking the tablet with the optional tablet cradle.
Note that a cradle is required in order to
synchronize your tablet with another computer with
ActiveSync.
10
PC Card Slot Barcode Scanner Port
1
• Pen: The main input device that you use to execute
programs and enter data. A pen holder is built into
the tablet to store the pen when not in use.
• Barcode Scanner Port: Allows you to connect a serial
device when using an adapter. Note that this is not a
standard RS-232 connector, and must be used with a
device that has a compatible connector. This allows
you to use the system with devices such as barcode
scanners.
• PC Card slot: Allows you to install a Type I or Type II
PCMCIA Card in the system.
Tablet Cradle Interface
1
Pen Holder