Installing A Pen Tether; Web Camera - Fujitsu Lifebook T1010 User Manual

Installing a Pen Tether

To prevent dropping or losing your pen, you should
attach it to your system using the pen tether that is
included with the system.
To attach the pen tether to your Tablet PC, perform
the following steps:
1
Attach the end of the pen tether with the smaller loop
to your pen. To do so, push the end of the tether
through the hole in the pen, then thread the opposite
end of the tether through the loop.
2
Attach the end of the pen tether with the larger loop to
the attachment point on your tablet. To do so, insert
the end of the pen tether through the attachment
point, then feed the pen through the large loop in the
tether.

Web Camera

Your Tablet PC has a 1.3 megapixel web camera located to the right of the latch. To use the web camera,
please refer to the help documentation that is part of the ArcSoft WebCam Companion software.
50 - Touch Screen
Figure 28. Installing a Pen Tether