Lcd Panel Illumination - Canon BP-511 Instructions Manual

For best results, use subjects such as plain white paper for white balance basis.
White balance data is loaded from the partial metering zone ( 17).
You can store white subjects photographed under various conditions on the CF
card, then select these images as needed for the [Custom WB] function as an
easy way of setting the ideal white balance for any lighting conditions.
The default setting for <

LCD Panel Illumination

The LCD panel can be illuminated for about 4 sec. by pressing the <
button again turns off the illumination.
After a picture is taken, the LCD panel illumination turns off automatically after 2 sec.
If C.Fn-12-1/2/3 has been set, pressing <
illumination (it will turn off automatically).
If you take a picture while the LCD panel is illuminated, the illumination will
continue as you shoot.
LCD panel illumination works in all shooting modes.
Custom White Balance Setting/ LCD Panel Illumination
> is the same as the default setting for <
On the menu, select [LCD illumi.]
and set the LCD panel illumina-
tion.
Press the < MENU> button.
Turn the <
then press <
Turn the <
press < >.
The LCD panel illumination will be enabled,
and the menu will reappear.
Press the < MENU> to quit the menu and
turn off the display.
Illuminating the LCD panel
Press < >.
To turn off the illumination, press <
again.
If you operate a button or dial for picture-
taking while the LCD panel is illuminated,
the illumination will continue. If you press a
menu or image playback button, the
illumination will turn off.
> will not turn off the LCD panel
>.
> button. Pressing the
> dial to select [LCD illumi.],
>.
> dial to select [On], then
3
>
67