Canon BP-511 Instructions Manual page 13

Mount the lens.
3
Align the red dots on the lens and
camera and turn the lens in the
direction shown by the arrow in the
diagram until it clicks into place. ( 27)
Turn on the camera.
7
Turn the main switch to <ON>.
( 29)
Check the image.
11
The image is displayed for
approximately 2 seconds after
the shot. ( 40)
Set the focus mode
4
switch on the lens to AF.
( 27)
Set the Mode Dial to <
8
(Full Auto).
( 38)
To check other images you have
taken, see "Check the Image
Immediately" ( 40) and "Viewing
Recorded Images" ( 98).
To erase images you have taken,
see "Erasing a Recorded Image
(Single Image Erase)" ( 43).
Quick Guide
>
13