Quick Guide - Canon BP-511 Instructions Manual

Quick Guide

Reference page numbers are indicated by (
Charge the battery pack.
1
Connect the power cord to the adapter,
then attach the battery. When the charge
lamp stops blinking and stays lit, the battery
is completely charged. A full battery charge
takes approximately 90 minutes. ( 22)
Open the CF card slot
5
cover.
Slide the cover in the direction
shown by the arrow, then open it.
( 28)
Focus on the subject.
9
Look through the viewfinder and place the
AF point over the subject. Then press the
shutter button down halfway to focus. ( 29)
The AF point which achieves focus will flash in red.
In low-light conditions or backlit daylight
conditions, the built-in flash fires
automatically. ( 86)
12
) .
Insert the battery pack.
2
Open the battery chamber cover
and slide the battery pack into
position until it locks into place.
Press the cover closed until it
clicks shut. ( 24)
Insert a CF card
6
(optional).
After inserting the CF card, close
the cover. ( 28)
Using CF cards made by Canon
is recommended.
Take the shot.
10
Press the shutter button down
fully. ( 29)