Using Non-Canon Flash Units; Lcd Panel Illumination - Canon EOS Rebel XT Instruction Manual

Using EOS-Dedicated, External Speedlites
4)
@
Before attaching an external Speedlite, retract the built-in flash if it is
popped up.
@
If the EX-series Speedlite's firing mode is set to TTL autoflash with the
Custom Function, the Speedlite will not fire.
Eil
I;}
If autofocus cannot be achieved, the external, EOS-dedicated
Speedlite's AF-assist beam (if the Speedlite has an AF-assist beam) will
be emitted automatically (except in the
<~> <~>
<lSI> modes).
@
The camera is a Type-A camera that can use all the features of EX-
series Speedlites.
Using Non-Canon Flash Units
e
The camera can synchronize with compact, non-Canon flash units at 1/
200 sec. or slower. Be sure to test the flash unit beforehand to make
sure it synchronizes properly with the camera.
If the camera is used with a flash unit or flash accessory dedicated to another
camera brand, the camera may not operate properly and malfunction may result.
,fJj
Do not attach a high-voltage flash unit on the camera's hot shoe. It might not work.
~e;:.
LCD Panel Illumination
@###i4i###fH¥
*.~
The LCD panel is provided with
illumination.
To illuminate the LCD panel, press the
<:!?:>
button (06). To turn off the
illumination, press the button again. Use
it to read the LCD panel in the dark.
aJ
0i
Pressing any shooting-related button or turning the Mode Dial while the
LCD panel is illuminated prolongs the illumination.
&>
When the camera is connected to a printer and the <
~l?:
> button turns
blue, the button functions as a Direct print button. (p.123)
102