Symbols; Intended Use - Viessmann VITODENS 100-W Installation And Service Instructions Manual

Information

Symbols

Symbol Meaning
Reference to other document containing
further information
Step in a diagram:
1.
The numbers correspond to the order in
which the steps are carried out.
Warning of material losses and environ-
mental pollution
Live electrical area
Pay particular attention.
Component must audibly click into place.
■
or
Acoustic signal
■
Fit new component.
■
or
In conjunction with a tool: Clean the sur-
■
face.
Dispose of component correctly.
Dispose of component at a suitable collec-
tion point. Do not dispose of component in
domestic waste.

Intended use

The appliance is intended solely for installation and
operation in open vented and sealed unvented heating
systems that comply with EN 12828 (as well as
CN: CECS215-2017 and CE: CS215-2017), with due
attention paid to the associated installation, service
and operating instructions. It is only designed for heat-
ing up heating water that is of potable water quality.
Intended use presupposes that a fixed installation in
conjunction with permissible, system-specific compo-
nents has been carried out.
Commercial or industrial usage for a purpose other
than heating the building or DHW shall be deemed
inappropriate.
10
The steps in connection with commissioning, inspec-
tion and maintenance are found in the "Commission-
ing, inspection and maintenance" section and identified
as follows:
Symbol Meaning
Steps required during commissioning
Not required during commissioning
Steps required during inspection
Not required during inspection
Steps required during maintenance
Not required during maintenance
Any usage beyond this must be approved by the man-
ufacturer in each individual case.
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibi-
ted and will result in an exclusion of liability. Incorrect
usage also occurs if the components in the heating
system are modified from their intended use (e.g. if the
flue gas and ventilation air paths are sealed).