Displays
(cont.)
■
Favourites
■
System overview
Home screen
After starting or activating the control unit the home
screen is shown.
In the delivered condition, the default display "Heating
circuit" or "Continuous operation" is shown as
home screen. The type of display depends on the
operating mode (weather-compensated operation,
continuous operation, room temperature-dependent
operation). You can specify a different default display
for the home screen: See page 37.
Call up the home screen as follows:
Standby display active:
■
Tap anywhere on the screen.
■
From the "Main menu":
Tap
.
Buttons and symbols
Fig. 5
Example: Weather-compensated operation
Menu line
A
Function area
B
Navigation area
C
Note
Some functions are not available in room temperature-
dependent operation. Where applicable, these func-
tions can be set on the room temperature controller,
e.g.
Time program for central heating.
Buttons and symbols in menu bar
Note
Not all buttons and symbols are available in room tem-
perature-dependent operation, for example the heating
circuit selection.
For further information regarding the default displays:
See page 22 onwards.
Note
You can prevent operation of the home screen: See
page 35.
If you do so, you will not be able to make adjustments
on either the home screen or the main menu.
"Panel locked" is displayed.
A
"Heating circuit ..." Selects the heating circuit.
Operation
Calls up the "Main menu".
Note
This choice is only available if
there are several heating circuits
in your system.
15