Preparing for installation
Fitting the wall mounting bracket
2. Mark out the rawl plug holes.
3. Drill
10 mm holes and insert the rawl plugs sup-
7
plied.
The rawl plugs are suitable for the following materi-
als:
Concrete
■
Vertically perforated bricks
■
■
Hollow concrete breeze blocks
■
Hollow brick and concrete ceilings
■
Perforated sand lime bricks
■
Solid sand lime bricks
Natural stone with dense structure
■
Porous concrete
■
■
Solid gypsum panels
■
Solid concrete breeze blocks
■
Solid bricks
16
(cont.)
4. Fit the wall mounting bracket with the screws sup-
plied.