Example Of Folder Structure; Error Messages - Panasonic PT-50DL54 Operating Instructions Manual

I M O
CON ENUS PERATION
Photo Viewer Operations (Cont.)

Example of Folder Structure

ROOT
DCIM
100 _PANA
101 _PANA
Note:
Folder and file names may vary according to the digital camera.
Photo Viewer Setup Menu
This menu allows you to customize features in the Photo Viewer
Setup menu.
Procedure
• Insert the SD or PC card to display the thumbnail screen.
• Press the SD button on the remote control to display the
Setup screen.
• Use the CH ,
the setup menu.
Set up Menu
Slide Show
Internal
Sequence
Repeat
Rotate
Card
SELECT
MENU
Slide Show - Allows you to start the slide show by pressing
the OK button while Start is highlighted. Press the OK button
to stop the Slide Show.
Note: When in the Slide Show mode, you can change the
aspect of the image on screen by pressing the ASPECT
button on the remote control.
Interval - Allows you to change the length of time that a slide
is being displayed on screen. Available settings are: 5, 10,
15, 30, 60, 90 seconds and 10 minutes.
Sequence - Select either Order or Random.
Repeat - Select Off or On.
Note: After setting Interval, Sequence or Repeat, press CH
button to select Start, then press OK to start the Slide
Show.
Rotate - Allows you to rotate the image left or right.
Zoom - Lets you select the magnification of the Single Slide
display.
30
Created automatically
Folder names consist
of a 3-digit folder number
which is followed by five
arbitrary characters.
P1000001.jpg
File names consist of
four arbitrary characters
P1000002.jpg
followed by a 4-digit file
number.
P1000003.jpg
P1000004.jpg
P1010001.jpg
P1010002.jpg
P1010003.jpg
P1010004.jpg
VOL or VOL keys to navigate in
Return
Start
5Sec
Order
Off
left
SD
OK
CHANGE
EXIT
Procedure
• While in the Single Slide display mode, press SD button
to display Photo Viewer Setup Menu. Zoom option will be
displayed in the Setup Menu.
• Highlight Zoom and press OK button.
• Press VOL or VOL
• Press OK button. To move the image in the picture
frame, press the navigation buttons.
• Press OK to view the slide in normal magnification.
Card - Select either SD or PC when both cards are inserted in
the slots.
Following are some of the error messages that may be displayed
on-screen when certain conditions are not met or exceed the
Photo Viewer specifications.

Error messages

Error condition
When inserting card
If the JPEG file is corrupted
and cannot be decoded.
If the card is not formatted with
FAT 12 or FAT 16 or if it is not
DCF standard.
If thumbnail and main picture
cannot be shown
Over 3000 image files
Resolution over
If incompatible card is inserted
The screen turned black to
avoid image retention. Press
any key to return to the normal
display.
Photo Viewer Troubleshooting
Symptoms
Cannot read the content of
the card
PC card cannot be ejected
Poor picture quality
Long time to display
button to select To Fit, x2 or x4.
Error messages displayed
on-screen
No card or card is not inserted
correctly
This type of image is not supported.
This type of format is not supported.
This icon will appear in place
of the thumbnail image.
Photo Viewer cannot support over
3000 JPEG files.
Photo Viewer cannot support over
8192 x 8192 pixels.
This type of card is not supported.
Press any key to return.
Solutions
A) Not compatible format. Must be
formatted with FAT 12 or FAT 16.
B) The extension is not "JPG".
Photo Viewer can display EXIF
standard JPEG file, and JPEG
file which is not EXIF standard
cannot be shown.
C) The folders are not in compliance
with DCF standard.
Push the card all the way in, and
eject.
If the main image cannot be read
(the file is partially corrupted), the
Photo Viewer will read the
thumbnail. Please confirm the
format of the image.
It will take a long time to display if
there are many images or if the files
are large.