Optional Equipment Connections; Rgb Input Connection; Analog Rgb Signals That Can Be Input - Panasonic PT-50DL54 Operating Instructions Manual

Optional Equipment Connections

RGB Input Connection

Procedure
• Press the TV/VIDEO button (refer to page 14) to select
RGB 1 or RGB 2 input.
• Connect a RGB cable to Computer or Laptop RGB
output.
Note: If no RGB signal is displayed after connecting laptop,
please refer to laptop manual for procedure on how to
switch the output signal.
• Connect the other end of the RGB cable to RGB IN 1 or
side RGB IN 2 on Projection Television.
• Connect the audio cable to Computer or Laptop AUDIO
OUT.
• Connect the other end of the audio cable to AUDIO IN on
Projection Television.
Note: RGB 2 input is located on lower right side of cabinet.
Computer
Tower box
Cables not Included
S-VIDEO
VIDEO
L
AUDIO
R
INPUT3
Terminals on right side of TV
Notes:
• Some PC models cannot be connected to the Projection
Television.
• The PC display size will be 4:2:2 format.
• There is no need to use an adapter for computers with PC
/ AT compatible D-SUB 15P terminal.
• The computer shown is for illustrative purposes only.
• Additional equipment and cables shown are not supplied
with this Projection Television.
• The picture will become dark if a RGB signal with a
vertical scanning frequency of 62 Hz is input. To obtain
the optimum picture quality with the Projection Television,
a vertical scanning frequency of 60 Hz is recommended.
Laptop
or
Conversion adapter
(if necessary)
Terminals on back of
Projection Television
ANT
R-AUDIO IN-L
AUDIO IN RGB 1 IN
AV IN
IN 1 IN 2 OUT IN 1 IN 2 IN 3
Y Y Y
S-VIDEO
VIDEO
P P P
B B B
VIDEO
P P P
R R R
L L L L L
AUDIO AUDIO
R R R R R
COMPONENT VIDEO INPUT
O
PTIONAL

Analog RGB signals that can be input

The table below lists the different types of analog RGB
signals that can be input. If a signal which differs greatly
from any of the types listed below is input, the picture
image may not be displayed correctly, or a black
background may be displayed.
Display No. of dots
mode name (H x V)
VGA70 640 X 400
VGA60 640 X 480
SVGA60 800 X 600
XGA60 1024 X 768
Note: The number of dots for this Projection Television is 800 × 600
for NORMAL display. Number of dots other than 800 × 600 in
the above data, will be converted to 800 × 600 (with the
exception of MAC 16, which will be displayed in 832 × 624
dots).
E C
QUIPMENT ONNECTIONS
Vertical scanning
frequency (Hz)
70.1
59.9
60.3
60.0
9