Connecting external devices
If the refresh rate set is too high, the monitor may be damaged. Please see the
!
documentation included with your monitor for the maximum possible refresh rate.
Connecting an external keyboard
You do not need to switch off your workstation.
Ê
Simply connect the external keyboard to the PS/2 port on your workstation.
Connecting an external PS/2 mouse
You do not need to switch off the workstation.
Ê
Simply connect the mouse to the PS/2 port on your workstation.
Connecting a serial mouse
Ê
Switch off the workstation.
Ê
Connect the mouse to the parallel port on your workstation.
Ê
Switch the workstation on.
Ê
Run the mouse service programme under Start - Settings - Control Panel and select the General
tab.
Ê
Select the correct mouse type.
Ê
Restart the workstation.
Using the parallel port
Ê
Switch off the workstation.
Ê
Connect the data cable of the printer to the parallel port on the workstation.
Ê
Plug the printer power cable into the mains outlet.
Ê
First switch on the printer, then the workstation.
64
A26391-K124-Z100-1-7619