Transporting The Workstation; Before You Travel - Fujitsu CELSIUS Mobile H Operating Manual

Important notes

Transporting the workstation

Please observe the points listed below when transporting your workstation.

Before you travel

If the removable keyboard is operated by a radio connection, your workstation may not be
!
switched on during a flight. In this case switch off the keyboard also (see chapter
"Working with the workstation").
However, you can also operate the keyboard without a radio connection (see chapter
"Working with the workstation").
Copy important data from the hard disk onto a floppy disk.
If you are travelling abroad, ensure that the power adapter can be operated with the local
mains voltage. If this is not the case, obtain the appropriate power adapter for your workstation.
Do not use any other voltage converter!
If you travel in another country, check whether the local power supply and the
i
specifications of the power cable are compatible. If this is not the case, buy a power cable
that matches the local conditions. Do not use a connection adapter for electrical devices
to connect the workstation.
If you use a modem, incompatibilities with the local telecommunications system may
result.
Transporting the workstation
Remove all data carriers (e.g. floppy disk, CD) from the drives.
Switch off the workstation.
Unplug the power adapter and all peripheral devices from the mains outlet.
Disconnect the power adapter cable and the data cables of all peripheral devices.
Close the LCD display of the workstation so that it locks into place.
If the device needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.
To protect against damaging jolts and bumps, use a carrying case to transport your
workstation.
Protect the workstation from severe shocks and extreme temperatures (e.g., direct sunlight in a
car).
8
A26391-K124-Z100-1-7619