Connecting External Devices; Connecting An External Monitor; Connecting An External Monitor To The Notebook - Fujitsu LIFEBOOK S936 Operating Manual

Connecting external devices

Connecting external devices
Always refer to the safety information provided in
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).

Connecting an external monitor

Connecting an external monitor to the notebook

You can connect an external monitor to the analogue VGA monitor connection of the
notebook. Screen output is limited to a maximum of two screens at any one time (see
"Key combinations", Page
Monitor Monitorport Screenport VGAconnection socket
Analogue VGA monitor connection socket
► Switch off the notebook and the external monitor.
► Connect the data cable of the external monitor to the monitor port of the notebook.
► First switch on the external monitor and then the notebook.
You can also use a key combination to switch back and forth between the external
monitor and the notebook's LCD screen, see chapter
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
62
28, section "Toggle output screen").
"Important notes", Page 12
"Key combinations", Page
before
28.
Fujitsu