Charging The Battery; Monitoring The Battery Charging Level; Inserting And Removing The Battery - Fujitsu CELSIUS Mobile H Operating Manual

Charging the battery

The battery indicator displays the remaining battery charge (see the chapter "Indicators on the
workstation"). When you switch on the workstation, it takes a few seconds before the battery status
is displayed.
You can charge the battery by connecting the workstation to the power adapter (see "Connecting
the power adapter and switching on the workstation for the first time").
The battery can only be charged when the ambient temperature is between 5°C and max. 35°C.
With the workstation switched on and off, the battery will completely recharge in approximately three
to four hours.
Work in the battery mode until an acoustic warning prompts you to recharge and the battery
indicator begins to flash. The workstation battery should not be charged before this point.
If you do not connect the power adapter within five minutes of the signals described above, your
workstation automatically switches itself off.

Monitoring the battery charging level

The remaining battery charge is indicated by the battery symbol in the status indicator panel (see
the chapter "Indicators on the workstation"). When you switch on the workstation, it takes a few
seconds before the battery status is displayed.
During mobile operation you can also use a "battery charge meter" for energy-saving monitoring
under Windows.
A battery icon is shown in the taskbar. When you place the mouse pointer on the battery symbol,
the system displays the battery status.
60 40 20
100 80
If no power adapter is connected to the workstation, the keyboard battery will be charged
i
by the workstation battery. Even if the workstation is switched off, the keyboard battery is
charging and detracts energy from the workstation battery.

Inserting and removing the battery

Only use batteries released for this workstation.
!
Never use force when inserting or removing a battery.
Make sure that no foreign objects enter the slots.
Ê
Switch off the workstation.
Ê
Place the workstation on a flat surface.
Ê
Open the LCD display panel.
A26391-K124-Z100-1-7619
Working with the workstation
You can also see the battery's charging state on
the battery itself.
There are five indicators next to the finger icon
on the battery telling you what percentage of the
battery is charged.
Ê
Press the finger icon.
The corresponding indicator lights up.
33