Restoring The Contents Of The Hard Disk Under Windows; The Workstation's Date Or Time Is Incorrect; Battery Indicator Does Not Illuminate - Fujitsu CELSIUS Mobile H Operating Manual

Troubleshooting and tips

Restoring the contents of the hard disk under Windows

Using the Windows Recovery CD and the CELSIUS Mobile Driver CD, you can restore the operating
system of your workstation.
During restoring the operating manual the contents of your hard disk will be overwritten. After this,
operating system, drivers and software utilities will be reinstalled. For this reason you should try to
save important data to a backup medium before you restore the hard disk contents.
Ê
Insert the Windows Recovery CD into the optical drive and switch the workstation on.
Ê
Follow the instructions on the screen.
i
Detailed PC knowledge is required for manual partitioning.
You must then reinstall all the drivers. Use the "CELSIUS Mobile Driver CD".

The workstation's date or time is incorrect

Ê
Double-click on the clock in the task bar and adjust the time.
or
Ê
Set the time and/or date in the BIOS Setup menu Main.
If the date and time are repeatedly incorrect when you switch on the workstation, the
i
buffer battery that supplies the internal clock is dead.
Connect the workstation via its power adapter to a grounded mains outlet or install a fresh
battery. The buffer battery will take approximately two days to complete its recharge.
Should the problem persist, please contact our Hotline/Help Desk.

Battery indicator does not illuminate

Battery is not installed or is defective.
If the battery status indicator does not light up, either no battery is installed or there is no contact
between the workstation and the battery.
Ê
Check whether the battery is installed correctly in its compartment.
It may be necessary to replace the battery with a new one. When you dispose of used batteries,
please observe the safety instructions in the chapter "Important notes".
74
A26391-K124-Z100-1-7619