Number Of Available Frames; Using Af/Ae Lock - FujiFilm Finepix S3000 Owner's Manual

TAKING PICTURES ( AUTO MODE )

Number of available frames

The number of available shots is displayed on
the screen.
G
!
See P.51 for information on changing the File size.
G
!
At shipment, the default " y " QUALITY settings is "
I Standard number of frames per xD-Picture Card
The table below shows the standard number of available frames for a new xD-Picture Card formatted on the
camera. The larger the xD-Picture Card capacity, the greater the divergence between the actual number of
available frames and the number shown here. Also, because the amount of data recorded for a shot varies
depending on the subject, in some cases the number of shots may decrease by 2 or may remain the same.
As a result, the actual number of recordable shots may either decrease or increase.
Quality mode ` 3M
2048 × 1536
Number of recorded pixels
DPC-16 (16 MB) 19
DPC-32 (32 MB) 40
DPC-64 (64 MB) 81
DPC-128 (128 MB) 162
DPC-256 (256 MB) 325
DPC-512 (512 MB) 651
28
３３ ３３
A
1 ".
2 2M 1 1M
1600 × 1200 1280 × 960
25 33
50 68
101 137
204 275
409 550
818 1101

USING AF/AE LOCK

1
A
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
! 0.3M
640 × 480
N
122
AF/AE Lock
247
On the FinePix S3000, when you press the Shutter button down half way, the focus and exposure settings
497
are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if you want
997 to set the exposure before you compose the final shot, lock the AF and AE settings and then compose
and shoot your picture to get the best results.
1997
3993
2
３３ ３３
Move the camera slightly so that one of the
subjects is in the AF frame.
N
３３ ３３
A
2
Continued
29