FujiFilm Finepix S3000 Owner's Manual page 47

6.4 INSTALLATION ON A Mac OS X
FinePixViewer and RAW FILE CONVERTER LE are installed on Mac OS X.
Switch your Macintosh on and start up Mac OS X. Do not launch any other applications.
1
Load the enclosed CD-ROM into the CD-ROM drive.
2
The "FinePix" window opens.
G
!
If the "FinePix" window does not open automatically, double-click the CD-ROM icon.
Double-click "Installer for MacOS X".
3
4
Click the " " icon.
(This operation is not required on version 10.2 (or later).)
Enter the administrator name and password.
5
Then click the [OK] button.
G
!
The window displayed in Mac OS X is slightly different.
92
Click the [Continue] button.
6
Quit any other programs that are running and then click the [Continue] button.
7
Click the [Continue] button in the "Software License Agreement" window.
8
Click the [Continue] button.
9
G
!
The software is installed in the "Applications" folder on the installation destination disk.
Click the [Install (upgrade)] button.
10
Enter your administrator name and password and then click [OK].
11
An installation progress window appears.
12
(Installation may take several minutes)
When you have completed the installation, click the [Restart] button.
13
6
Continued
93