Regular Maintenance; Maintenance Schedule - Snapper PRO S200XT Operator's Manual

Regular Maintenance

Maintenance Schedule

The following schedule should be followed for normal care of your rider and mower. You will need to keep a
record of your operating time. Determining operating time is easily accomplished by observing the elapsed time
recorded by the hour meter.
UNIT MAINTENANCE
Before Each Use
Check Safety Interlock System
Check Rider Brakes
Check Rider / Mower for loose hardware
Check Hydraulic Oil Level**
Every 25 Hours
Clean Deck & Check / Replace Mower Blades*
Lubricate Rider & Mower*
Check Tire Pressures
Every 100 Hours
Check Mower Blade Stopping Time
Clean Battery & Cables
Initial Change of Hydraulic Oil
Every 400 Hours or Yearly
Change Hydraulic Oil & Filter
* More often in hot (over 85°; 30° C) weather or
dusty operating conditions.
** Change original hydraulic oil after first 100 hours of
operation.
ENGINE MAINTENANCE
Before Each Use
Check Engine Oil Level
Every 25 Hours
Check / Clean Cooling Fins & Intake*
Every 50 Hours
Check / Clean Spark Arrester**
Refer to Engine Manufacturer's Owner's Manual
Service Air Filter
Change Engine Oil & Filter***
Check / Replace Spark Plugs
Check / Replace Fuel Filter
* More often in hot (over 85°; 30° C) weather or
dusty operating conditions.
** If equipped. Replace if damaged.
*** Change original engine oil after first 5 hours of
operation.
Maintenance
27