Snapper PRO S200XT Operator's Manual page 24

Operation
Practice Turning Around a Corner
While traveling forward allow one handle to gradually
return back toward neutral. Repeat several times.
NOTE: To prevent pivoting directly on the tire tread,
it is best to keep both wheels going at least slightly
forward.
Executing
Turns
Figure 12. Turning Around a Corner
Executing an End-Of-Row Zero Turn
Your Zero Turn Rider's unique ability to turn
in place allows you to turn around at the end
of a cutting row rather than having to stop and
Y-turn before starting a new row.
For example, to execute a left end-of row zero
turn:
1. Slow down at the end of the row.
2. Move the RIGHT ground speed control
lever forward slightly while moving the
LEFT ground speed control lever back to
center and then slightly back from center.
3. Begin mowing forward again.
This technique turns the rider LEFT and slightly
overlaps the row just cut —eliminating the need
to back up and re-cut missed grass.
As you become more familiar and experienced
with operating the Zero Turn rider, you will
learn more maneuvers that will make your
mowing time easier and more enjoyable.
Remember, the more you practice, the
better your control of the Zero Turn will be!
22
Practice Turning In Place
To turn in place, "Zero Turn," gradually move one
ground speed control lever forward from neutral and
one lever back from neutral simultaneously. Repeat
several times.
NOTE: Changing the amount each lever is pulled—
forward or back, changes the "pivot point" you turn on.
Turning
In-Place
Figure 13. Turning in Place
Figure 14. Executing an End-Of-Row Turn
www.SnapperPro.com