Table of Contents
Advertisement
Remove the battery:
1.
Slide the release latch (1) to release the battery.
2.
Pivot the front edge of the battery (2) up and back.
3.
Remove the battery (3) from the computer.
To insert the battery:
1.
Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release
latch will automatically lock into place.)
Optical drive
NOTE:
The optical drive spare part kit includes a bezel and bracket.
Description
Blu-ray Disc ROM FX SuperMulti DVD±R/RW Double-Layer Drive
Blu-ray Disc R/RW FX SuperMulti Drive
DVD±RW Double-Layer FX SuperMulti Drive (for use only with computer models equipped with an
Intel processor)
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
48
Chapter 4 Removal and replacement procedures
Spare part number
666394-001
666393-001
666395-001
Advertisement
Table of Contents
