Omron E3Z Series Manual page 6

F502-EN2-04.book Seite 48 Dienstag, 26. Juli 2005 5:48 17
Reflectors
Not provided with retroreflective models
Name Sensing distance (typical) *
3 m [100 mm] (Rated value)
4 m [100 mm] (Rated value)
500 mm [80 mm]
Reflectors
2 m [100 mm]
5 m [100 mm]
2.5 m [100 mm]
3.5 m [100 mm]
500 mm [80 mm]
Fog preventing
2 m [100 mm]
Small reflector 1.5 m [50 mm]
700 mm [150 mm]
Tape Reflector 1.1 m [150 mm]
1.4 m [150 mm]
* Values in parentheses indicate the minimum required distance between the sensor and reflector.
Note: 1 . When using the reflector of other than the rated value, set the sensing distance to about 0.7 times of the typical example as a guideline.
2 . For details, refer to the "Reflector list".
Mutual interference prevention filter
Sensing distance Shape/dimensions
10.8
7.4
3 m
31.4 11.2
Mounting Brackets
Shape Model Quantity
E39-L153
E39-L104
9-L43
E39-L142
E39-L44
E39-L98
Note: 1 . If a through-beam model is used, order two Mounting Brackets for the emitter and receiver respectively.
2 . For details, refer to the "Mounting bracket list".
A-48
Model
E39-R1
E39-R1S
E39-R1S
E39-R2
E39-R9
E39-R10
E39-R1K
E39-R3
E39-RS1
E39-RS2
E39-RS3
Model
4.9
1
2 sets each for emit-
E39-E11 ters and receivers
(total of 4 pcs.)
0.2
Remarks
1
Mounting Brackets
1
Horizontal type mounting
1
bracket
Horizontal type protective
1
cover bracket
1 Rear mounting bracket
1 Protective cover bracket
Quantity
1
1
for E3Z-B#1/6
1
for E3Z-B#2/7
1
1
1
for E3Z-B#1/6
1
for E3Z-B#2/7
1
1
1
1
Quantity
Can be used with the through-beam E3Z-T##A.
The arrow represents the polarizing direction.
Changing the polarizing direction of the two adja-
cent emitters and receivers prevents mutual in-
terference.
Shape Model Quantity
E39-L150 One set
E39-L151 One set
E39-L93@ One set
E39-L144 1
Standard Photoelectric Sensors
Remarks
Remarks
Remarks
Sensor adjuster
Easy mounting to alumi-
num frame/rail of conveyor
or like, easy adjustment.
For left-to-right adjustment
Sensor adjuster
Easy mounting to alumi-
num frame/rail of conveyor
or like, easy adjustment.
For vertical angle adjust-
ment
Vertical protective cover
bracket