Maintenance; Battery Replacement - Amprobe AT-6000 User Manual

1.800.544.2843

5. MAINTENANCE

5.1 Battery Replacement

Changing the Transmitter Batteries
The battery compartment on the back of the Transmitter is designed to make it easy for
the user to change the batteries. A screw is added to secure the battery in case the unit is
dropped. Eight (8) AA alkaline or rechargeable NiMH batteries may be used. NiMH batteries
need to be removed to be charged.
Note: Batteries do not come pre-installed in the Transmitter.
1. Make sure that the Transmitter is turned off and disconnected from the circuit.
2. Use a star screw driver to unscrew the battery compartment screws.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the screws.
Figure 5.1: Changing the Transmitter batteries
www.calcert.com
15
10 20
5 25
0 30
8 x AA batteries
25
sales@calcert.com