Maintenance And Repair - Amprobe 3730217 User Manual

Temperature / Humidity
Operating:
Storage:
Power Supply:
Battery life:
Auto Power Off:
Dimension (Base):
Dimension (Sensor):
Weight:
�
-EMC: EN61326-1 This product complies with requirements of the
following European Community Directives: 89/336/EEC (Electromagnetic
Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE
Marking). However, electrical noise or intense electromagnetic fields in the
vicinity of the equipment may disturb the measurement circuit. Measuring
instruments will also respond to unwanted signals that may be present within
the measurement circuit. Users should exercise care and take appropriate
precautions to avoid misleading results when making measurements in the
presence of electronic interference.
Illumination:
Measuring Range: 200, 2000, 20000, 200000 Lux
Accuracy: ±3% for white LED light (Calibrated to standard incandescent lamp
2856º K and corrected LED day white-light spectrum).
± 8% for other visible light sources
Angle deviation from cosine Characteristics
30 ° ± 2 %
60 ° ± 6 %
80 ° ± 25 %
Cosine Angular corrected per JIS C 1609:1993 and CNS 5119 general A class
specifications.

MAINtENANCE AND REPAIR

If there appears to be a malfunction during the operation of the meter, the
following steps should be performed in order to isolate the cause of the
problem.
1. Check the battery. Replace the battery immediately when the symbol
"�" appears on the LCD.
2. Review the operating instructions for possible mistakes in operating
procedure.
20, 200, 2000, 20000 Foot candles
-10 °C to 40 °C (14˚F to 104˚F), 0 to 80 %RH.
-10 °C to 50 °C (14˚F to 122˚F), 0 to 70 %RH.
9V NEDA 1604, IEC 6F22, JIS 006P battery
typical 200 hours (Alkaline)
approx 6 min
130 x 63 x 38 mm (5.1 x 2.5 x 1.5")
80 x 55 x 29 mm (3.2 x 2.2 x 1.1")
220 g (.48 lb.) include battery
3