Table of Contents
Advertisement
10.3.7. Mechanism Unit
1. Remove 2 Screws (C) and the Wire Tie.
2. Lift upward the Digital P.C.B. to remove it.
(When assembling, first set the Mechanism unit to tabs (A)
then tighten the 2 Screws (C).)
Screw (C)
Mechanism Unit
Tab (A)
Wire Tie
10.3.8. AC Inlet Unit
1. Detach the lead wires fixed at the hooking part.
2. Unlock the 2 tabs (A) and remove the AC Inlet Unit.
26
AC Inlet Unit
Tab (A)
Hooking part
Advertisement
Table of Contents
