Panasonic SC-XH385GA Service Manual page 24

10.3. Disassembly Procedure
10.3.1. Top Panel
1. Remove the 6 Black Screws.
2. Open the both ends at the rear side of the Top Panel in
the direction of arrow (1), then pull up the top panel in the
direction of arrow (2) to remove it.
Black Screw
(1)
Black Screw
10.3.2. Front Panel Unit
10.3.2.1. Tray Ornament
1. Insert paper clips, etc. into the hole on the unit bottom,
then slide the gear in the direction of arrow (1) to eject the
tray slightly.
2. Unlock 2 tabs.
3. Pull the Tray Ornament in direction of arrow (2).
Paper
clip,etc.
(1)
Tray Ornament
(2)
Tab
Disc Tray
Top Panel
(2)
Black Screw
(1)
Disc Tray
10.3.2.2. Front Panel Unit
1. Disconnect the connector (A), connector (B),and FFC
cable.
2. Unlock 5 tabs (A) - (E).
3. Pull the Front Panel Unit in the direction (1).
Tab(B)
Tab(A)
(1)
Front Panel
Tab(C)
10.3.3. Front Panel P.C.B. / MIC P.C.B.
1. Remove 5 Screws (B).
2. Remove two Matel Plats.
Screw(B)
Metal Plate Front Panel P.C.B.
3. Pull out the Front Panel P.C.B. unit.
24
Connector(A)
FFC
Tab(E)
Connector(B)
Tab(D)