Panasonic SC-XH385GA Service Manual page 25

4. Remove 1 Screw (C) to remove the MIC P.C.B unit..
MIC P.C.B.
10.3.4. Power Supply P.C.B.
1. Disconnect the connector (A) and connect (B).
2. Remove 4 Screws (C)
3. Unlock the Plastic Expansion Bolt, then remove the Power
Supply P.C.B..
Screw (C)
Power Supply
P.C.B.
Screw (C)
Connector (A)
Connector (B)
Screw (C)
Plastic Expansion Bolt
10.3.5. Fan Motor Unit
1. Remove the 2 Screws (A).
2. Remove the connector (A), then remove the Fan Motor
Unit in directon of (1).
Screws (A)
Connector (A)
10.3.6. Digital P.C.B.
1. Remove 4 Screws (C) and 1 Screw (A) on the back panel.
2. Remove 3 Screws (C) on the Digital P.C.B..
3. Disconnect FFC cabel and connector (A) and (B).
4. Lift upward the Digital P.C.B. to remove it.
Screw (C)
FFC
Screw (C)
25
Fan Motor Unit
(1)
Screw (A)
Connector(A)
Connector(B)
Screw (C)
Digital P.C.B.