Table of Contents
Advertisement
7. Press the screws till they match the inserts
8. Fasten the screws with a screwdriver
9. Use flat screwdriver
10. Insert the WiN5200 so that the wall mounting bracket holes match the holes of the
mounting bracket of the device
11. Insert four flat washers, four spring washers and four screws (type NC ¼ x ½ HEX) and
press until they match the treads of the holes of the mounting bracket
12. Fasten the screws with a screwdriver
WiN5200
Installation Procedure | 34
Advertisement
Table of Contents
