Omron NXEIP202 User Manual page 151

Terminal Manufac-
types
Terminals Weidmuller
other than
ground ter-
minals
*1. Some AWG14 wires exceed 2.0 mm
When you use any ferrules other than those in the above table, crimp them to the twisted wires so that
the following processed dimensions are achieved.
1.6 mm max.
(Terminals other than ground terminals)
2.0 mm max.
(Ground terminals)
 Using Twisted or Solid Wires
If you use twisted wires or solid wires, use the following table to determine the correct wire specifica-
tions.
Terminals
Classifica-
tion
All terminals
except
ground
terminals
Ground
terminals
*1. Secure wires to the screwless clamping terminal block. Refer to Securing Wires for how to secure wires.
*2. With the NX-TB1 Terminal Block, use twisted wires to connect the ground terminal. Do not use a solid
wire.
Conductor length (stripping length)
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
Applica-
ble wire
Ferrule
turer model
(mm
(AWG))
H0.14/12 0.14 (#26)
H0.25/12 0.25 (#24)
H0.34/12 0.34 (#22)
H0.5/14 0.5 (#20)
H0.5/16
H0.75/14 0.75 (#18)
H0.75/16
H1.0/14 1.0 (#18)
H1.0/16
H1.5/14 1.5 (#16)
H1.5/16
2
and cannot be used in the screwless clamping terminal block.
Twisted wires
Current
capacity
Plated Unplated
2 A max. Possible Possible
Greater Not pos-
than 2 A sible
and 4 A
or less
Greater
*1
Possible
than 4 A
--- Possible Possible
Crimping tool
2
Weidmuller (The figure in parentheses is the appli-
cable wire size.)
PZ6 Roto (0.14 to 6 mm
8 to 10mm
2.4 mm max.
(Terminals other than ground terminals)
2.7 mm max.
(Ground terminals)
Wire type
Solid wire
Plated Unplated
Possible Possible
*1 Not possi-
Possible
ble
Not possi-
ble
*2 *2
Possible Possible
7 Wiring
2
, AWG26 to 10)
Conductor
length
Wire size
(stripping
length)
8 to 10 mm
2
0.08 to 1.5 mm
(AWG 28 to 16)
9 to 10 mm
2
2.0 mm
7 - 13
7