Table of Contents
Advertisement
Front view
⑴ PHONE: Earphone jack
⑵ POWER: Power on/off
Connect with power cable or mount battery, press the "POWER" and the power indicator is turned on
and after 10 seconds, the monitor will be switched on and get into normal working status. Press the
"POWER" again, the indicator is turned off and monitor is switched off.
Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of
time.
⑶ CVBS: Press to switch the input signal to Composite video
⑷ HDMI: Press to switch the input signal to HDMI
⑸ B/W: Black and White mode
⑹ OVERSCAN: Overscan / Underscan switch
⑺ MENU: Press to enter Menu
⑻ F1: User definable function key 1
⑼ F2: User definable function key 2
⑽ RATIO: 16:9 and 4:3 switch
⑾ ZOOM: Picture Zoom-in
Press "ZOOM" to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in.
⑿ DISPLAY: Display current settings
Press "Display" to display safety mark, title and the current input signal information
⒀ OK: Select and Apply
Under menu system, revolve "OK" to adjust settings and press to apply; and out of menu system, directly
revolve "OK" to adjust volume.
⒁ TALLY Light: Red, Green and Yellow 3-color TALLY indicator
All manuals and user guides at all-guides.com
DT-X71CI
Advertisement
Table of Contents
