Important Notes - Roland UM-ONE Owner's Manual

IMPORTANT NOTES

Placement
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave
it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
• When moved from one location to another
where the temperature and/or humidity is
very different, water droplets (condensation)
may form inside the unit. Damage or
malfunction may result if you attempt to use
the unit in this condition. Therefore, before
using the unit, you must allow it to stand for
several hours, until the condensation has
completely evaporated.
• Do not put anything that contains water (e.g.,
flower vases) on this unit. Also, avoid the use
of insecticides, perfumes, alcohol, nail polish,
spray cans, etc., near the unit. Swiftly wipe
away any liquid that spills on the unit using a
dry, soft cloth.
Maintenance
• For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Additional Precautions
• Use a reasonable amount of care when using
its jacks and connectors. Rough handling can
lead to malfunctions.
• When connecting / disconnecting all cables,
grasp the connector itself—never pull on the
cable. This way you will avoid causing shorts,
or damage to the cable's internal elements.
• When you need to transport the unit,
package it in the box (including padding)
that it came in, if possible. Otherwise, you will
need to use equivalent packaging materials.
• Company names and product names
appearing in this document are registered
trademarks or trademarks of their respective
owners.
5