How To Control On-Screen Menu Utility; Auto Scan - Hitron FASTRAX II E Instruction Manual

3.3 How to control the On-Screen Menu Utility
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
CTRL + Joystick

3.4 Auto Scan

The Auto scan supports up to 8 programmed angles at user-programmable speeds. Follow
these steps to program Auto Scan:
SPEED(MODE) :
Action
MENU
ESC
(First Item of the Main menu / Shortcut: SCAN)
AUTO SCAN SETUP
SCAN 01
SPEED(MODE) : FAST VECTOR
START ANGLE : 127.1, 027.7 X7
END ANGLE
SCAN DIR.
SWAP
SAVE AND EXIT (ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE SELECT POSITION.
NORMAL1~NOMAL9,SLOW VECTOR,FAST VECTOR
NORMAL1 (SLOWER) ↔ NORMAL9 ( FASTER)
SLOW VECTOR, FAST VECTOR : Move from start point to end point
including tilt and zoom simultaneously and linearly. In case of
HID2404HCExxx model, zoom is fixed at more wide angle and the zoom
magnification information is not displayed.
Call the On-screen menu utility
Go into the sub-menu items.
Execute the command(exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title.
Change value.
Enter editing title mode.
Change value of angle
Escape (EXIT)
: AUTOSCAN01
: 157.7, 080.7 X13
: CCW
: OFF
12
Function