Chapter 2 - Installation And Configuration; Package Contents - Hitron FASTRAX II E Instruction Manual

Chapter 2 — Installation and Configuration

2.1 Package Contents

The package contains the following.
Fastrax II E (Dome Camera)
Bubble Ring
Instruction Manual (This Document)
Assembly Screws for Attaching Fastrax II E
Plastic Anchor
10Pin Connector
12Pin Connector
CAUTION: Be sure to have caution labels (
of the camera. Different version will not support input and output.
The dome camera is for use in surface mounting applications and the mounting surface should
be capable of supporting loads up to 10lb (4.5kg).
The dome camera's base should be attached to a structural object, such as hard wood, wall stud
or ceiling rafter that supports the weight of the dome
Unlock
CABLE ENTRY
Lock
Lock
Figure 3 – Installation
...........................1
...........................1
...........................1
...........................3
...........................3
...........................1
...........................2
E
version only) on both the body and the base
camera.
SURFACE(CEILING)
Align extruded tap in the base to
the Keyhole on the pcb in the body
3
BASE
BODY