Changing Fahrenheit (F) To Celsius (C) - Robertshaw 7610 User Manual

110-1060.qxd 3/27/03
All manuals and user guides at all-guides.com
3. Press
SET P
*T T D
HE EMPERATURE IFFERENTIAL IS
THAT WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM
,
THE TEMPERATURE SETTING THE SYSTEM WILL TURN ON
,
ON TOO OFTEN INCREASE THE TEMPERATURE DIFFERENTIAL
4. Press
SET P
**T
HE RESIDUAL COOL FEATURE WILL KEEP THE SYSTEM FAN ON FOR AN ADDITIONAL
SECONDS AFTER THE COMPRESSOR CYCLES OFF
.
SETTING THE COOLING PROGRAM

Changing Fahrenheit (F) to Celsius (C)

Press and hold SET.
SET P
Release both simultaneously.
QuickSet Programming Mode*
™
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT AUTO - ON
1. Place COOL-OFF-HEAT
in HEAT or COOL position.
2. Press and hold SET. Press the ¨ button.
Release simultaneously.
3. The MORN indicator should be blinking. Program the time of day and
the temperature as outlined in the Setting Daily Program section.
*QuickSet will program all 7 days of the week with the same program.
™
Individual days can then be changed or modified.
10:51 AM Page 6
Press
to change
temperature differential.*
F 1°. T
ACTORY PRESET AT HIS MEANS
. I
F THE SYSTEM TURNS
.
Press
to change
residual cooling.**
. R C
ESIDUAL OOLING CAN ONLY BE PROGRAMMED WHEN
Press
COOL-OFF-HEAT
6
(Black plate)
30, 60 90
OR
SET P