Changing Fahrenheit (F) To Celsius (C) - Robertshaw 7610 User Manual

110-1060.qxd
3. Press
SET P
*T T D
HE EMPERATURE
THAT WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM
THE TEMPERATURE SETTING
,
ON TOO OFTEN INCREASE THE TEMPERATURE DIFFERENTIAL
4. Press
SET P
**T
HE RESIDUAL COOL FEATURE WILL KEEP THE SYSTEM FAN ON FOR AN ADDITIONAL
SECONDS AFTER THE COMPRESSOR CYCLES OFF
SETTING THE COOLING PROGRAM

Changing Fahrenheit (F) to Celsius (C)

Press and hold SET.
SET P
Release both simultaneously.
QuickSet
™
PROG
MAN
SET PROG/MAN
1. Place COOL-OFF-HEAT
in HEAT or COOL position.
2. Press and hold SET. Press the ¨ button.
Release simultaneously.
3. The MORN indicator should be blinking. Program the time of day and
the temperature as outlined in the Setting Daily Program section.
*QuickSet will program all 7 days of the week with the same program.
™
Individual days can then be changed or modified.
3/27/03 10:51 AM
Press
to change
temperature differential.*
F
IFFERENTIAL IS ACTORY PRESET AT
,
THE SYSTEM WILL TURN ON
Press
to change
residual cooling.**
. R
ESIDUAL
.
Press
Programming Mode*
COOL-OFF-HEAT AUTO - ON
Page 6
1°. T
HIS MEANS
. I
F THE SYSTEM TURNS
.
C
OOLING CAN ONLY BE PROGRAMMED WHEN
COOL-OFF-HEAT
SET P
6
(Black plate)
30, 60 90
OR