Sony MHC-V41D Service Manual page 36

MHC-V41D
10. When the operation of swiping on the gesture control sensor,
shown in the following fi gure, will appear display correspond-
ing to the operation.
Note: Do not touch or contact to the gesture control sensor when you per-
form the swiping motion.
Screen display (Right to left)
Screen display (Bottom to top)
(Displayed characters in the above fi gure are example)
Releasing method:
Press two buttons of the [ ] and [MIC/GUITAR LEVEL –] simul-
x
taneously for 3 seconds, and return to the normal mode.
36
Screen display (Left to right)
Screen display (Bottom to top)
SHOP FRONT DEMO
The demo mode can be performed.
(This mode is used by shop front)
Procedure:
1. Press the [ ] button to turn the power on.
1
2. Press the [FUNCTION] button to select the "DVD/CD" or
"USB" function, and set the media according to the function.
3. Press two buttons of the [
x
for 5 seconds.
4. The message "AutoPLAY" is displayed on the vacuum fl uo-
rescent display.
Screen display
5. Press the [– TUNING
.
select either "AutoPLAY" or "AutoSTOP" in the demo mode,
then press the [ ] button to decision.
N
Screen display
6. The message "10 MIN" is displayed on the vacuum fl uorescent
display.
Screen display
7. Press the [– TUNING
.
auto play or auto stop timer value (01 MIN to 20 MIN) setting,
then press the [ ] button to decision.
N
8. This unit is rebooted. It enters the demo mode, "* DEMO *"
and current function state are alternately displayed on the vac-
uum fl uorescent display.
(When the "AutoPLAY" has been selected in step 5, playback
starts automatically)
Screen display
current function state display
9. When the "AutoPLAY" has been selected in step 5, even if
stopping the playback, playback starts automatically after the
setting time.
When the "AutoSTOP" has been selected in step 5, even if
starting the playback, playback stops automatically after the
setting time.
(Even if pressing the [ ] button, the disc tray is locked and
Z
cannot be opened)
Releasing method:
Press two buttons of the [ ] and [MIC ECHO] simultaneously for
x
5 seconds.
Note: The demo mode does not release by unplug the power supply cord.
] and [MIC ECHO] simultaneously
] or [TUNING + ] button to
>
or
] or [TUNING + ] button to
>