Guidelines For Wiring A 2U1N Configuration; Power Connectors On Rear Panel Of Servers And Switches - Dell EMC ScaleIO Ready Node 14G Hardware Installation Manual

Wiring Diagrams for a 2U1N Configuration

Guidelines for wiring a 2U1N configuration

Hardware Installation Guide
76
Use the following figure as reference for connectors on rear panels of the servers and
switches:
Figure 35 Power connectors on rear panel of servers and switches
iDRAC
Port 1
Port 1
Use the wiring diagrams to connect power, management, and data cables.
As cables are installed and connected, dress and tie cables frequently so that excess
slack does not interfere with routing of adjacent cables.
2U1N
Port 1
Management Server
Port 1
Data Switch
Management Switch
Port 2
Port 2
Port 2
Port 2