Invacare Ben NG Series User Manual page 38

Invacare® Ben NG Series
WARNING!
– Place the wheelchair with the user
forward-facing in direction of vehicle travel.
– Engage the wheelchair parking brakes.
– Activate anti-tipper (if installed).
The wheelchair tie-down positions where the restraint
system straps must be placed are marked with snap hook
symbols (see following figures and section 2.3 Labels and
symbols on the product, page 9 ).
1. Using the front and rear straps of the 4-point restraint
system, secure the wheelchair to the vehicle mounted
rails. Refer to the user manual supplied with 4-point
restraint system.
38
Front side tie-down positions for belt straps:
1. Attach the front straps above the castor supporters as
shown in the two figures above (see location of the
attachment labels).
2. Attach front straps to the rail system referring to best
practice recommended instructions from the safety belt
manufacturer.
3. Disengage parking brakes and apply tension front straps
by pulling the wheelchair backwards from the rear.
1551536-C